Linksys Manual For Wrt54g
WRT54G v8.0 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even moresecurefrom various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, considerflashingan open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatlyincreasethe stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Linksys WRT54G v8.0:
Linksys WRT54G Firmware and Manual Links. The latest firmware available for the WRT54G is available on the Linksys WRT54G Downloads page, as are instructions for upgrading the router's firmware. Download the firmware that matches the hardware version of the WRT54G router. The hardware version number is at the bottom of the router.
- Linksys WRT54G Firmware upgrade: Firmware is the software of the router. Linksys WRT54G version 5 and 6 need firmware upgrade. If you have trouble connecting to the wireless network or slow speed then download and upgrade the Linksys WRT54g router firmware. The firmware file for Linksys WRT54G version 1 to 4 is same.
- Nov 28, 2005. Hello, I have lost the manual for my WRT54G router. Where can I get another one? I've tried the Linksys website but can't find it there.
Flashing dd-wrt on the Linksys WRT54G v8.0
Since the WRT54G v8.0 has 2 MiB of flash memory, you should choose astripped down version of dd-wrt that fits on the smaller flash.
Instructions on how to flash dd-wrt onto your Linksys WRT54G v8.0 can be foundonthedd-wrt wiki
Note: Always make sure to read the wiki and howtos of dd-wrt before doing anyflashing.
Flashing OpenWrt on the Linksys WRT54G v8.0
The Linksys WRT54G v8.0 is supported by OpenWrt according to their Table ofHardware. Soflashing OpenWrt onto it should be quite straigthforward.
To get started with the flashing, head over to theOpenWrt instructions for WRT54G v8.0 and they'll take it from there.
Note: Flashing custom firmwares is always on you're on own risk. Make sure toread OpenWrt's wikis to understand the risks and how to proceed if something goeswrong.
Linksys stock firmware for the WRT54G v8.0
Stock firmwares for the WRT54G v8.0 are available under the download section on themodem'ssupport page. You can also referto the router's manual for instructions on how to upgrade the firmware.
Related Articles
- 1 Put a Password on a Linksys Without the CD
- 2 How Do I Get the Network Key for My D-Link?
- 3 Set Up the Belkin Wireless G Router
- 4 Reset a Linksys Administrator
When you are first setting up a network for your office or business, you will probably go with a wireless router that can handle network encryption, such as a Linksys router. Since Linksys routers are meant to provide quick access to their provided network, you can connect the router to your modem, get on the network and log on to the Linksys administration page, where you can finalize your setup by managing security settings.
1.Insert one end of the Ethernet cable into the Ethernet jack of your modem. Insert the other end into the Ethernet jack labeled 'Internet' on the back of the Linksys router.
2.Insert the two-pronged AC adapter for the Linksys router into a wall outlet. Insert the other end into the 'Power' jack on the back of the router. Wait until the 'Power' light in front of the router is solidly lit and the 'WLAN' light is flashing.
3.Connect to the network with your computer. The process for this may differ, but operating systems will often automatically detect the network.
4.Type '192.168.1.1' into the address bar of your Web browser. The login screen appears. Enter a username of 'admin' and leave the password field blank. The administration page appears.
5.Click 'Administration,' then click 'Management.' Enter and re-enter a router password to require the password for access to the administration page. Click the 'Save Settings' button and write down the password for future reference.
6.Click 'Wireless,' then click 'Wireless Security.' Select 'WPA Personal' from the drop-down menu. Enter a passkey in the 'Enter Key' text field. Click 'Save Changes' to encrypt the network. This requires other users of the network to enter the passkey before connecting to the wireless network.
References (1)
About the Author
G.S. Jackson specializes in topics related to literature, computers and technology. He holds a Bachelor of Arts in English and computer science from Southern Illinois University Edwardsville.
Photo Credits
- Hemera Technologies/AbleStock.com/Getty Images